Door Lintel Calculator
Use this Door Lintel Calculator to estimate volume for the Door Lintel Calculator search intent. Use this door header size calculator to get a practical header depth estimate from the rough opening width and a load factor. It is useful for quick planning, code discussions, and comparing header options before framing starts.
Result
--
What This Door Lintel Calculator Helps You Do
Use this door header size calculator to get a practical header depth estimate from the rough opening width and a load factor. It is useful for quick planning, code discussions, and comparing header options before framing starts.
How to Door Lintel Calculator
- Measure the opening width - Enter the rough opening span in feet. Use the framed opening, not the finished door size.
- Set the load assumptions - Choose a load factor and story factor that reflect the wall and roof load above the door.
- Read the estimated depth - The calculator returns a practical header depth in inches that you can compare to common nominal lumber sizes.
- Verify with local requirements - Use the estimate as a planning guide and confirm final sizing against structural requirements or code tables.
Door Lintel Calculator Formula
| Symbol | Definition | Unit |
|---|---|---|
| Opening width | Door opening span | ft |
| Load factor | Relative load assumption | |
| Story factor | Extra factor for heavier framing loads |
Working Examples for Door Lintel Calculator
- Opening width: 4 ft
- Load factor: 1.5
- Story factor: 1.0
Result: Estimated header depth = 10.0 in.
A standard single-story opening lands near a 10 inch header-depth estimate.
- Opening width: 5 ft
- Load factor: 1.6
- Story factor: 1.0
Result: Estimated header depth = 12 in.
A wider patio door pushes the estimate into the 2x10 to 2x12 discussion range.
- Opening width: 4.5 ft
- Load factor: 1.8
- Story factor: 1.2
Result: Estimated header depth = 13.72 in.
A heavier load assumption moves the header estimate well above a basic 2x8.
- Opening width: 6 ft
- Load factor: 2.0
- Story factor: 1.3
Result: Estimated header depth = 19.6 in.
A very wide opening with a heavier load factor can point you toward an engineered header rather than a small standard member.
How to Interpret Your Results
| Range | Meaning | Action |
|---|---|---|
| < 7 in | Light header range | A compact header may work for simple openings, subject to code. |
| 7-9 in | Common residential range | Often comparable to a typical 2x8 or similar build-up. |
| 9-12 in | Heavier residential range | Compare against 2x10 or built-up header options. |
| > 12 in | Large opening or high load | Consider a built-up or engineered header and confirm with code tables. |
Frequently Asked Questions About Door Lintel Calculator
Sources
Last reviewed: March 2026